This unit is especially used to re-measure
the orientation of silicon ingot that was oriented in the DX
There is one working platform within this unit, and there is a fascia and holding apparatus on the platform. The silicon ingot is fixed on this apparatus after stuck with spacer stripe (graphite/glass/resin) and sticking plate. The end face orientation is re-measured under X-ray irradiation. Two ingots could be re-measured on one sticking plate.
Ingot diameter 3~8 inch
Sticking plate length, max. 500 mm
Sticking plate width 70/
Rotary angle of fixing plate (α) +/-
Note: It is negotiable for a special requirement.